54 printable Shadal toys, the Ten Plagues in snap-together kits, a printer teardown, Tefillin Trials World 2, and Ross reads you anything.

● The Workshop · Week of 9 November 2026

A toy for every parsha, a printer with no stepper motors, and a podcast host hiding RSS in his name

This week's issue is brought to you by DoppelGifter.

Shalom friends,

This week a lot of what I built is made to come off a 3D printer and sit on your Shabbat table: a toy for every parsha and the Ten Plagues in kits. Plus a printer I took apart because it came without a power cord. Here's what shipped.

🧸 Headliner

A toy for every parsha, after Shadal

Claude Opus 5.5
Six of the 54 parsha toys: the rakia holding up the upper waters, the burning bush, the Urim and Tumim, the Levites' open land, Ekev's spare clothes and shoes, and Noach's ark under the rainbow

54 printable snap-together toys, one for each parsha. Each one is built on a single peshat of Shmuel David Luzzatto, with the Hebrew of his comment and a Sefaria link beside the model. Some favourites:

  • The rakia (Bereshit 1:6) is a beaten sky-blue plate holding up the upper waters, with windows the rain comes through.
  • The burning bush (Shemot 3:2): the flames stand in the gaps between the thorns and never touch them.
  • The Urim and Tumim (Vayikra 8:8) are 22 letter tiles you draw from the choshen. Alef is called “ur” and tav “tam.”
  • The Levites' open land (Bamidbar 35:4) is a stacking toy, with empty ground inside the wall as well as outside, like Rome's pomerium.
  • Ekev's clothes that didn't wear out, which Shadal reads with no miracle at all: God gave them spare clothes and shoes.

Every toy prints on a Bambu A1 mini with no supports. The page has a 3D viewer you can pull apart to see how each one goes together, plus a 3MF plate and STLs.

Find this week's toy →


🤝 Work with me

Want something like this for your team?

Work with me: an open workshop with AI training, market positioning and a website glowing inside

Everything in this email was built with AI as a co-pilot. I help teams do the same:

  • AI & Claude training: prompt engineering, AI strategy and hands-on projects, built around your team's real work.
  • G2 positioning & AEO: get found by buyers and by AI answer engines, from a former G2 Principal Analyst in AI, Automation and Analytics.
  • Custom websites: fast, distinctive sites like this one.
See how we can work together →

🐸 3D printing

The Ten Plagues, as kits

Claude Opus 5.5
The ten plague kits: blood, a frog with its baby, lice under a magnifying glass, wild beasts, a cow, a kiln of boils, a clear hailstone, a locust, an eye with a removable film, and a doorway marked with blood

Ten snap-together kits, one per plague, built for the same printer. There's a frog that has already split off a baby (Rashi's one frog), a clear hailstone that closes around a flame, and blood on the doorposts printed as a second colour.

Where the commentators disagree, you get a kit for each reading. Arov is R' Yehuda's wild animals or R' Nechemia's hornets and mosquitoes (Shemot Rabbah 11:3). Choshech is darkness over the land, or the Torah Temimah's bold suggestion (10:21) that it was a film over the pupil “the thickness of a dinar,” which you could feel with your hand. That kit is an eye with a film you can take off.

Print a plague →


📣 A word from our sponsor

Yaakov needed goatskin. You just need DoppelGifter.

Yaakov in fluffy goatskin sleeves and a necktie printed with bowls of lentil stew, handing a pot of stew to blind Yitzchak while Rivka gives a thumbs up from the tent flap

It took Yaakov two goatskins, his brother's best clothes and a pot of stew to pass himself off as someone else (Bereshit 27). Even then, Yitzchak wasn't fooled by the voice.

DoppelGifter makes custom gifts with no disguise required: mugs, framed prints, phone cases, and a tie for every parsha. None of them will get you a bracha meant for your brother, but they will get you a compliment at Kiddush. Code YUD takes 10% off, because yud = 10.

The voice is the voice of Yaakov, but the mug is the mug of DoppelGifter. (Full disclosure: DoppelGifter is my shop, so this ad cost me nothing.)

Make something custom →


🎙️ New tool

Ross Reads It

Claude Opus 5.5Kokoro voiceGoogle WaveNet (Hebrew)
RoSS reads it: your reading, in your podcast app

Give Ross a PDF, a link or a photo of a page, and he reads it to you in your podcast app. It started as a way to listen to a textbook chapter on a walk. Hand him a whole book and he splits it into chapters, one episode each, in a feed of its own. If the day's allowance runs out, he picks up where he left off the next day.

He reads Hebrew too. Half an hour of audio takes about a minute, because a GPU does the reading, not your browser. It's free for about 5 minutes a day, or 30 if you leave an email. The name hides the part that makes it work: RoSS, as in RSS.

Hand Ross a PDF →


🖨️ Teardown

Taking apart a printer

Claude Opus 5.5
An HP Photosmart C6180 pulling apart in 3D: lid, scanner glass, ink carriage, paper trays and chassis separating, then snapping back together

An old HP Photosmart C6180 showed up without a power cord, so I took it apart instead, in 3D, one step at a time, and you can click any part to see what it does. The surprise: there are no stepper motors in it. Cheap DC motors move the carriage and the paper, and a clear strip and a clear disc printed with fine lines tell the printer exactly where they are.

Take it apart →


🪬 Game · World 2

Tefillin Trials: the tefillin stand

Claude Opus 5.5

A new world for this week's chabura (simanim 25–27: which arm, where on the arm, and when you say the bracha). You and your kid run a tefillin stand on a stone street corner. Each person who walks up has a different arm question: a lefty, someone ambidextrous, someone who writes with his left and does everything else with his right, and two soldiers wounded in the war.

Then the camera cuts to a giant arm, and you set the bayit down on the lower half of the muscle while it slides back and forth. It's scored like the shiur's basketball rule: touch the line and you're out. Then say “lehaniach” while the knot is tightening. Miss it, and the game asks what to do. (Bless anyway: every moment they're on is the mitzvah, which is why it's “lehaniach” and not “likshor.”)

Every level now ends with a leaderboard, and each shiur has its own link.

Open the stand →


⚡ Quick hits

Also this week

54
parsha toys
10
plague kits
0
stepper motors
10
quote cards

Reply and tell me which parsha toy you'd print first, or what Ross should read you. I really do read every reply.

Shavua tov from the workshop,
Matthew

You're getting this because you joined The Workshop list at theothermatthewmiller.com/newsletter, where past issues live too. Reply “unsubscribe” and I'll take you off the list. Each section is tagged with the model I built it with; the sponsor's art is FLUX.2 [klein]. Toys designed for a Bambu A1 mini; peshat by Shadal.