← 3D

Taking apart a printer

HP Photosmart C6183 (C6180 series)

I picked up one of these all-in-ones without a power cord, so instead of printing with it I'm taking it apart to see how a printer works. It came out around 2006, takes six HP 02 inks into a separate printhead, and has a flatbed scanner, a document feeder, Wi-Fi and Ethernet. The model below pulls apart in the order you'd take the real one apart. Step through the guide or click any part.

The model is built from simple shapes with approximate proportions, not from HP drawings. Your unit's screws and clips may be in different places, so photograph as you go.

Click a part to see what it does and what to look for.

The teardown

What you learn from it

How the drops are made

A thermal inkjet head heats a resistor behind each nozzle for a few millionths of a second. The ink touching it boils, and the bubble pushes out one drop. Thousands of nozzles fire thousands of times a second.

How it knows where it is

Not with stepper motors. Both moving parts, the carriage and the paper, run on cheap DC motors, and each one has an optical encoder (the strip and the disc) counting fine lines as it moves.

Why it uses ink when idle

The service station keeps the nozzles alive by capping, wiping and "spitting". All of that ink goes into the felt, which is why an unused printer still empties its cartridges.

How the scanner sees

The scanner only ever sees one line. A strip of light and a strip of sensors move down the page, and the image is built up line by line, much like the print head builds a page band by band.

What to keep

Keep
DC motors (two or three), the steel carriage rod, timing belt and pulleys, springs, the gear train, screws, the encoder strip and its sensor.
Maybe
The screen (hard to drive without its board), rubber rollers, and small optical sensors (the paper flags use the same slotted sensor you can buy for an Arduino).
Recycle
Main board, Wi-Fi card, power module, scanner. Take them to an e-waste point.
Bin
The ink felt, the service station, and any cartridges, bagged.

Should you get it running first?

Seeing it move before you take it apart teaches a lot: the carriage homing, the service station wiping, the scan bar sweeping. If the power module is still in the back, all you need is a mains cord that fits its socket. Resellers list the module for this series as HP 0957-2105 (32 V), with 0957-2259, 0957-2271 and 0957-2230 as substitutes, but check the label on yours. Printing is another matter: HP stopped making 02 cartridges around 2020, and the ones still sold are mostly remanufactured or third-party. For a teardown, you don't need any ink.

● The Workshop · weekly

Everything I build, in one email a week.

Torah tools, daf games and AI experiments, with the story behind each one. Sign up and this week’s issue arrives within the hour.